Schulte Sales Australia - Rock Pickers - Rotary Slashers - Rotary Cutters

Schulte Sales Australia - Rock Pickers - Rotary Slashers - Rotary Cutters

1 Barton Street Wellington NSW 2820
Ph. (02) 6845 2992
Fax. (02) 6845 3199

Manager Director: Neil Eckart
Mobile. 0418 636321
Email

 Schulte Slashers & Rotary Cutters FX1200 & FX1800 

Schulte Slashers & Rotary Cutters FX1800

 

  1. A single domed 7 gauge continuously welded deck. This makes the cutter extremely easy to clean, prevents water pooling and rusting, helps shed debris as you cut and weighs less than double decks.

  2. 6.5 blade overlap and high blade tip speeds.

  3. A four gearbox drive line with independent slip clutches. The FX-1800 / FX-1200 utilizes heavy-duty and extremely reliable Bondioli gearboxes. The splitter has 1 3/4 20 spline input and output shafts and is rated at 260hp. The centre and wing boxes have 1 3/4 20 spline input shafts, 2 3/8 down shafts and are rated at 210hp.

  4. An 80 degree CV shaft allows for smooth power transmission during tight turns. The CV for 540 rpm is a Category 6 and for 1000 rpm is a category 5. The driveline on the cutter itself employs self-adjusting friction clutches to protect your investment and always operate at peak performance. All clutches are located under the main shield for ease of service. An Optional Non CV Equal Angle Hitch is available in 540 RPM.

  5. Spun formed 7gauge stump jumpers (round skid pans) ensure durability and balance.

  6. Available in 540 or 1000 rpm drive.

Schulte Slasher & Rotary Cutter FX1800 - diagram

 

Schulte Slashers & Rotary Cutters FX1200 & FX1800  features 1

 

Schulte Slashers & Rotary Cutters FX1200 & FX1800  features 2

Email
Schulte Slashers & Rotary Cutters FX1200 & FX1800 Specifications

SPECIFICATIONS FX-1800 FX-1200
Cutting Width 180 (4.57m) 126 (3.20m)
Overall Width 190 (4.83m) 137 (3.48m)
Overall Length 202 (5.13m) 202 (5.13m)
Transport Width 93 (2.36m)(Singles on wings)
102 (2.59m)(Duals on wings)
93 (2.36m)(Singles on wings)
97.5 (2.47m)(Duals on wings)
Transport Height 84 (2.13m) " 84 (2.13m) "
Deck Thickness 7GA (3/16  4.6mm) " 7GA (3/16  4.6mm) "
Weight 4563 lbs (2069kg)
to 5113lbs (2319kg)
4313 lbs (1956kg)
to 4863lbs (2205kg)
Hitch Weight 1702 lbs (772kg)
(Depends on configuration)
1602 lbs (727kg)
(Depends on configuration)
Minimum Tractor HP 50 HP (37kW) 45 HP (34kW)
Recommended Tractor HP 85 HP (63kW) 80 HP (60kW)
Tractor PTO Speed 540 or 1000rpm 540 or 1000rpm
Cutting Height 1.75 to 16.75" (44.5mm to 425mm) " 1.75 to 16.75" (44.5mm to 425mm) "
Ground Clearance 14.75 (42.5mm) " 14.75 (42.5mm) "
Cutting Capacity 4 (101.6mm) " 4 (101.6mm) "
Blade Overlap 6.5 (165.1mm) " 6.5 (165.1mm) "
Divider Gearbox Rating 260 HP (194kw) 260 HP (194kw)
Center & Wing Gearbox Rating 210 HP (157kw) 210 HP (157kw)
Output Shaft 2.38 (60.3mm) " 2.38 (60.3mm) "
Blade Tip Speed 540 rpm 540 rpm
     Center 15980 ft/min (4871m/min) 15980 ft/min (4871m/min)
     Wing 15459 ft/min (4711m/min) 15459 ft/min (4711m/min)
Blade Tip Speed 1000 rpm 1000 rpm
     Center 15974 ft/min (4869m/min) 15974 ft/min (4869m/min)
     Wing 15708 ft/min (4788m/min) 15708 ft/min (4788m/min)
Wing Working Range 25o down to 90o up 25o down to 90o up
Wing Floating Range 25o down to 30o up 25o down to 30o up
Drive Size Main Cat. 5CV (1000rpm), Cat. 6 CV (540 rpm) Cat. 5CV (1000rpm), Cat. 6 CV (540 rpm)
Drive Size Center & Wings Category 5 Category 5
Side Skirt Depth & Thickness 13.63 (346mm) & 1/4 (6.35mm) " 13.63 (346mm) & 1/4 (6.35mm) "
Suspension Rubber gromett 3 puck system Rubber gromett 3 puck system

 

Schulte Slashers & Rotary Cutters FX1200 & FX1800 Options

Go Number One.... Go Schulte