22 Barton Street
Wellington NSW 2820
Slasher & Rotary Cutter FX318
Legendary Toughness, Economically Priced
|Schulte Cutters are legendary throughout the mowing industry for being the toughest and most dependable. The FX-318 continues this renowned
tradition at an economical price.
Greaseable hingeline turnbuckles help to reduce wear and aid in long life of the cutter’s parallel lifting mechanism.
FX-318 side skirts are 13 5/8" deep. This additional room under the deck, along with high blade tip speeds, allows for a better cut and better material flow.
We use extemely strong and durable 517 hubs and spindles with built in metal seal guards on this cutter to tackle any type of terrain.
A one piece center shield allows for easy and full access to drivelines, clutches and gearboxes on the center section.
This cutter has replaceable skid shoes which are made out of 3/8" thick Abrasion Resistant steel.
The center and wing wheel standards are constructed from heavy duty large 5 9/16" O.D. x 3/8" thick HSS round tubing.
Schulte has many hitch options including clevis hitch, an adjustable clevis, precision hitch or solid tongue to help create a better fit & reduce wear on your tractor's drawbar.
Schulte Industries Super Suction 1/2" x 4” blades leave nothing behind. Schulte blades are strengthened through a hardening process which increases the impact strength of the blade. The blade is chamfered around the blade bolt hole to provide a smooth transition of surfaces around the high stress blade bolt area. The blades are also shot peened to induce beneficial compressive surface stresses over the entire length of the blade.
This enhances the durability and extends the fatigue life of the blade. The cutting edge is forged giving it a stronger and tougher edge thereby extending the life of the blade.
Schulte Industries exclusive Pentagon Blade Bolt provides maximum anti rotational resistance where
the blade is fastened to the stump jumper pans.
All pivot points use 1" greaseable pins.
Deck rings are standard on the FX-318. Deck rings protect the cutter deck from the blades rising when obstacles are encountered.
Schulte Slasher & Rotary Cutter FX318 Specifications
|Cutting width||216 (5.5m)|
228 maximum (5.8m)
|Overall length||208" maximum (5.3m)|
|Overall Transport width||86” (2.2m)(Singles on wings) 96” (2.4m)(Duals on wings)|
|Overall Transport height||109” (2.77m)|
|Deck Thickness||7GA (3/16", 4.6mm)|
|Weight||5800 lbs (2631kg) (Depends on configuration)|
|Hitch Weight||2350 lbs (1066kg)(Depends on configuration)|
|Minium tractor HP||75HP (56kW)|
|Recommended Tractor HP||90HP (67kW)|
|Tractor PTO Speed||540 or 1000rpm|
|Cutting Height||1.75" to 16.75" (44.5mm to 425mm)|
|Ground Clearance||14.75" (42.5mm)|
|Cutting Capacity||3.5" (89mm)|
|Blade Overlap||6" (152mm)|
|Divider Gearbox Rating||260HP (194kw)|
|Center & Wing Gearbox Rating||210HP (157kw)|
|Output Shaft||2.38" (60.3mm)|
|Blade Tip Speed||540 rpm|
|Center||15980 ft/min (4871m/min)|
|Wing||16319 ft/min (4974m/min)|
|Blade Tip Speed||1000 rpm|
|Center||15974 ft/min (4869m/min)|
|Wing||16581 ft/min (5054m/min)|
|Wing Working Range||25o down to 80o up|
|Wing Floating Range||25o down to 30o up|
|Drive Size Main||Cat.5CV(1000rpm), European Size 6 / Cat.6CV(540 rpm), European Size 8|
|Drive Size Center & Wings||Category 5, European Size 6|
|Side Skirt Depth & Thickness||13.63" (346mm)|
|Suspension||Rubber 3 puck grommet|