Schulte Sales Australia - Rock Pickers - Rotary Slashers - Rotary Cutters

Schulte Sales Australia - Rock Pickers - Rotary Slashers - Rotary Cutters

1 Barton Street Wellington NSW 2820
Ph. (02) 6845 2992
Fax. (02) 6845 3199

Manager Director: Neil Eckart
Mobile. 0418 636321

 Schulte Slashers & Rotary Cutters XH1000 & XH1500 

Schulte Slashers & Rotary Cutteers XH1500

  • Tandem Walking Axles

  • Single Domed Deck with Deck Protection Rings

  • New Extra Heavy Duty Gear Boxes and Drive Lines

Schulte Slashers & Rotary Cutters XH1000 & XH1500 - side
Heavy Duty Stump Jumper & Deck Rings
Schulte Slashers & Rotary Cutters XH1000 & XH1500 - back
Ultra Narrow Transport Width
  1. New, extra heavy duty, high horsepower Bondioli & Pavesi gearboxes with new oil level sight glass and
    1-3/4" input shafts and 3 (75mm) output shafts, 260hp divider, 210hp center & wings

  2. New Bondioli & Pavesi G8 drive lines with high-torque wing clutches give better performance in rough cutting

  3. A deep cutting chamber coupled with high blade tip speeds result in a superior cut & unsurpassed material ow

  4. 24" severe duty tires, transport height of 17.5" along with superior performance in wet conditions

  5. Lower pressure 8" stroke hydraulic phasing cylinders for a level lift for an even cut

  6. Low maintenance Constant Velocity Tractor Shaft or Patented 540 rpm Equal Angle Hitch available

  7. Center suspension reduces stress on tractor drawbar

  8. 3/8 thick formed deck protection rings prevent blade to deck contact

  9. Double safety chains with individually replaceable links are standard equipment

  10. Single domed, sweep clean deck design eliminates excess weight over competitive double deck designs, eliminates build up of debris & prevents rusting on top side of deck

  11. Tandem walking axles result in smooth operation over rough surfaces

  12. 1/4 thick stump jumpers with Pentagon Blade Bolt design allow cutter sections to ride over obstructions

  13. New replaceable spring steel bushings in the hitch pivots, main pivots, tension link pivots, suspension pivots
    and the center and outside wheel standard main pivots

Schulte's Series 4, XH1500 and XH1000 Rotary Cutters offer unparalleled cutting performance for demanding commercial and agricultural use. Increased blade tip speeds and greater space under the deck contribute to clean cutting in all conditions.

A center suspension system reduces stress to the rotary cutter and the tractor. Industry leading transport clearance improves performance in rough terrain.

New low maintenance constant velocity tractor drive shafts require weekly, rather than daily service.

Our stump jumpers are built to last
Schulte Slashers & Rotary Cutters XH1000 & XH1500 - stump jump
Patent pending Pentagon Blade Bolt design with replaceable bushings
Flat 1 thick blade bar design with heavy duty bracing

Schulte Slashers & Rotary Cutters XH1000 & XH1500 Standard Features

Blade pans have " thick skins and at blade bar, blade bolts with pentagon lock and pentagon sleeve, high capacity 5 bolt wheel hubs, replaceable axles, integrated center and wing transport locks, wings oat 35o up to 25o down without pumping hydraulic cylinders, large diameter two plate clutches with nitrided surfaces, free oating hitch with bolt on, replaceable swivel, leveling adjustments on each wing, retractable wing wheels for narrow transport, double chains front & rear.

Schulte Slashers & Rotary Cutters XH1000 & XH1500 - Standard Features

Schulte Slashers & Rotary Cutters XH1000 & XH1500


Schulte Slashers & Rotary Cutters XH1000 & XH1500 Options

540rpm Equal Angle hitch, precision hitch, precision clevis hitch, standard clevis hitch, 540 or 1000 rpm drive packages, severe duty tires, foam lled severe duty tires, solid laminated tires, forklift tires, towing hitch kit, manual winch kit, spool valve kit, shredder blade kit, wing walking axles, safety lighting kit, optional rubber guard kit for front edge and tool box kit.

Schulte Slashers & Rotary Cutters XH1000 & XH1500 Specifications

Cutting Width 180 (4.57m) 126 (3.20m)
Overall Width 190" (4.83m) 139 (4.88m)
Overall Length 192" (4.88m) 192" (4.88m)
Transport Width min 88" (2.24m) 88" (2.24m)
Transport Height 88" (2.24m) 88" (2.24m)
Deck Thickness 7GA (3/16") (4.6mm) 7GA (3/16") (4.6mm)
Weight approx. 5800 lbs (2636kg) 5200 lbs (2364kg)
Hitch Weight, approx. 1900 lbs (864kg) 1700 lbs (773kg)
Minimum Tractor HP 65 HP (52kW) 50 HP (45kW)
Recommended Tractor HP 85 HP (67kW) 75 HP (60kW)
Cutting Height 1.5 to 17.5" (38 to 144mm)
Ground Clearance 17.5" (444mm)(with 24 tire)
Cutting Capacity 4" material (102mm)
Blade Overlap 6.5" (165mm)
Divider Gearbox Rating 260 HP (194kW)
Center & Wing Gearbox Rating 210 HP (157kW)
Blade Tip Speed 540 rpm
     Center 848 rpm, 15,493 ft/min (4874m/min)
     Wing 986 rpm, 15,991 ft/min (4722m/min)
Blade Tip Speed 1000 rpm
     Center 850 rpm, 15,743 ft/min (4884m/min)
     Wing 1002 rpm, 16,022 ft/min (4798m/min)
Wing Working Range 25o down to 90o up


Go Number One.... Go Schulte