Schulte Sales Australia - Rock Pickers - Rotary Slashers - Rotary Cutters

Schulte Sales Australia - Rock Pickers - Rotary Slashers - Rotary Cutters

22 Barton Street Wellington NSW 2820
Ph. (02) 6845 2992
Fax. (02) 6845 3199

Manager Director: Neil Eckart
Mobile. 0418 636321

 Schulte Slasher & Rotary Cutter FX742

Schulte Slasher & Rotary Cutter FX742

Introducing the world’s largest slasher & rotary cutter at 42’ wide (12.8m)

  1. 42' (12.8m) of cutting width will make those long days short again. Use one cutter where traditionally two or three cutters were needed. Cover more ground, while reducing the number of tractors and fuel required in an operation. Increasing your efficiencies, means more money in your pocket.

  2. Unique 5-plex design flexibility allows for a completely "road-able" machine at a 118" (3m) transport width.

  3. Available with stump jumpers for pasture and grass maintenance or with Schulte's exclusive fixed knife and baffle technology for mulching crop residue such as straw, corn or cotton stalks.

  4. Unmatched reliability with a premium Bondioli & Pavesi SFT drive & gearbox system. 350 HP divider box, 180 HP T-boxes & 190HP right angle down boxes.

  5. Size 10 main CV with an over running clutch provides worry free shut downs.

  6. Fully compatible for all row crop cutting in 30", 32", 38", 40" and one metre row spacing.

  7. A parallel solid tongue hitch maintains even load on the tractor draw bar.

  8. Full rubber grommet suspension across the entire unit reduces shock loading and maintains even cutting, even in the roughest of conditions.

  9. Schulte's unique driveline arrangement allows for independent clutch protection for each down rotor.

  10. A continuously welded 10 gauge domed deck adds strength and durability while reducing debris and water build up on the top of the deck.

Schulte Slasher & Rotary Cutter FX742 – fixed knife unit
Fixed knife unit


 Schulte Slasher & Rotary Cutter FX742 – stump jumper unit
Stump jumper unit shown above

Schulte Slasher & Rotary Cutter FX742 – high right view

Schulte Slasher & Rotary Cutter FX742 – 80 degree CV shaft

  • Excellent shredding and distribution

  • Unique drive layout allows for self adjusting slip clutches at every down box

  • Sloped back design improves spread of cut material

  • Spun formed stump jumpers for perfectly balanced pans

  • Replaceable pentagon blade bolt bushings for pan unit

  • Floating hitch and rubber grommet suspension

  • Low maintenance SFT Bondioli driveline and Bondioli gearboxes

  • Only 4 grease zerks on mechanical parts of machine

  • Greaseless Garmax MLG bushings and nitrided pins minimize service time

  • Deck protection rings on center and inner wings

  • Replaceable skid shoes

  • 10 gearbox layout with 7 slip clutches

  • Continuously welded 10 ga deck

  • Hydraulic phasing and mechanical hybrid lift system with hydraulic depth control

  • Rotor layout optimizes cutting performance

  • Easy to use safety lock up

  • Adjustable wheel standards for different row crop spacing

  • One year full warranty coverage with 3 year limited gearbox warranty


Schulte Slasher & Rotary Cutter FX742 Specifications

Cutting width 42ft (12.8m)
Overall width 42.9ft (13.1m)
Overall length 24.25ft (7.4m)
Cutting height 2" - 16" (51mm - 406mm)
Transport width 118" (3m)
Row crop wheel trans. width 146" (3.7m)
Transport height 165" (13.75ft or 4.2m)
Weight 18,000lbs (8165kg) depending upon configuration
Hitch weight 6,500lbs (2950kg) depending upon configuration
Cutting capacity 2" (51mm)
Minimum tractor size 250hp (186kW) ensure drawbar cansupport weight
Blade Tip Speed 16,300 ft/min (4970m/min)
Blade Overlap 6.5" (165mm)
Divider Box Rating 350hp (261kW)
T Box ratings 180hp (134kW)
Skirt Thickness 1/4" (6.4mm)
Inside wing operating range 11˚ down to 13˚ up
Outside wing operating range 8˚ down to 10˚ up

Divider boxes have 1.75" 20 spline input and output shafts
Down boxes have 1.75" 20 spline input and 2.375" down shafts

Tractor 80 degree CV shaft with 1 3/4" 20 spline coupler with over running clutch is standard

Schulte Slasher & Rotary Cutter FX742 – under operation

Schulte Slasher & Rotary Cutter FX742 Options
Stump Jumper Unit, Fixed Knife Unit, Single chains front and rear, Single chains front and rear with front rubber belting, Front and Rear rubber belting only, 3 meter wheel extensions or Row crop wheel extensions

Schulte World Class...Built To Last!