Schulte Slasher & Rotary Cutter FX1800

  1. A single domed 7 gauge continuously welded deck. This makes the cutter extremely easy to clean, prevents water pooling and rusting, helps shed debris as you cut and weighs less than double decks.
  2. 5” blade overlap and high blade tip speeds.
  3. A four gearbox drive line with independent slip clutches. The FX-1800 utilizes heavy-duty and extremely reliable Bondioli gearboxes. The splitter has 1 3/4” 20 spline input and output shafts and is rated at 260hp. The centre and wing boxes have 1 3/4” 20 spline input shafts, 2 3/8” down shafts and are rated at 210hp.
  4. An 80 degree CV shaft allows for smooth power transmission during tight turns. The CV for 540 rpm is a Category 6 and for 1000 rpm is a Category 5. The driveline on the cutter itself employs self-adjusting friction clutches to protect your investment and always operate at peak performance. All clutches are located under the main shield for ease of service. An Optional Non CV Equal Angle Hitch is available in 540 RPM.
  5. Spun formed 7 gauge stump jumpers (round skid pans) ensure durability and balance.
  6. Available in 540 or 1000 rpm drive.

Schulte Slashers & Rotary Cutters FX1800 Specifications

Specifications

FX-1800

Cutting Width180” (4.57m)
Overall Width190” (4.83m)
Overall Length202” (5.13m)
Transport Width93” (2.36m)(Singles on wings) 
102” (2.59m)(Duals on wings)
Transport Height84" (2.13m)
Deck Thickness7GA (3/16"  4.6mm)
Weight4563 lbs (2069kg) 
to 5113lbs (2319kg)
Hitch Weight1702 lbs (772kg)
(Depends on configuration)
Minimum Tractor HP50 HP (37kW)
Recommended Tractor HP85 HP (63kW)
Tractor PTO Speed540 or 1000rpm
Cutting Height1.75" to 16.75" (44.5mm to 425mm)
Ground Clearance14.75" (42.5mm)
Cutting Capacity4" (101.6mm)
Blade Overlap6.5" (165.1mm)
Divider Gearbox Rating260 HP (194kw)
Center & Wing Gearbox Rating210 HP (157kw)
Output Shaft2.38" (60.3mm)
Blade Tip Speed540 rpm
Center15980 ft/min (4871m/min)
Wing15459 ft/min (4711m/min)
Blade Tip Speed1000 rpm
Center15974 ft/min (4869m/min)
Wing15708 ft/min (4788m/min)
Wing Working Range25 degrees down to 90 degrees up
Wing Floating Range25 degrees down to 30 degrees up
Drive Size MainCat. 5CV (1000rpm), Cat. 6 CV (540 rpm)
Drive Size Center & WingsCategory 5
Side Skirt Depth & Thickness13.63" (346mm) & 1/4” (6.35mm)
SuspensionRubber gromett 3 puck system